Welding wire Böhler WEARmig Dur 600, D300, 15kg - 1.2 mm
  • New
Welding wire Böhler WEARmig Dur 600, D300, 15kg - 1.2 mm

Vielos tipas
Pilnavidurė aplydymo viela
Diameter (Ø)
1.2 mm
Suvirinimo procesas
MIG/MAG, aplydymas MAG būdu
Vielos skersmuo
1,2 mm
Vielos svoris
15 kg
Ritės tipas
B300, vielinė krepšinė ritė
Klasifikacija pagal EN 14700
S Fe 8
Klasifikacija pagal DIN 8555
MSG 6-GZ-60-S
Medžiagos numeris
1.4718
Aplydyto metalo kietumas be terminio apdorojimo
54–60 HRC
Pirmojo sluoksnio ant nelegiruoto plieno kietumas
Apie 53 HRC
Srovės tipas ir poliškumas
Nuolatinė srovė DC, viela jungiama prie teigiamojo poliaus (+)
Apsauginės dujos pagal EN ISO 14175
M12, M13, M21 arba C1
Tipinė cheminė sudėtis
C – 0,5 %; Si – 3,0 %; Mn – 0,5 %; Cr – 9,5 %; Fe – likutis
Mechaninis apdirbimas po aplydymo
šlifavimas
1595264

Welding wire Böhler WEARmig Dur 600, D300, 15kg - 1.2 mm

Ask for the price and delivery time by phone

You can buy our products from our partner stores

Interested in a B2B partnership?

Contact us:

Description

UTP WEARmig Dur 600 - a solid MIG/MAG hardfacing wire designed for restoring worn metal part surfaces and forming a protective, wear-resistant layer. Suitable for parts subjected to high impact loads and moderate abrasive wear.

The weld metal has a hardness of 54-60 HRC while retaining toughness and crack resistance. It is a practical choice for equipment repair and maintenance when it is important to restore the working surface and increase its wear resistance.

Key benefits:

  • Wear and impact resistance - the hard deposited layer protects heavily loaded surfaces.
  • Restoration of worn surfaces - suitable for repair hardfacing and renewing the working layer of parts.
  • Tough, crack-resistant weld metal - combines high hardness with resistance to mechanical loads.
  • Wide industrial application - used for hardfacing parts of quarry, crushing, mining, steel and cement production equipment, as well as cutting tools and dies.
  • 15 kg B300 spool - designed for use with compatible MIG/MAG wire feed equipment.

Application

The wire is intended for MAG hardfacing with shielding gas. Before work, the surface must be ground to clean metal. The need for preheating and the hardfacing parameters are selected according to the base metal and the part. The deposited layer can be machined by grinding.

Apmokėjimas gavus prekes

Prekėms esančioms sandėlyje nereikalingas išankstinis apmokėjimas.

Nemokamas pristatymas

Užsakymus virš 70 € iki 3 kg į DPD paštomatus pristatysime nemokamai.

Grąžinkite per 14 dienų

Jei nesate patenkinti pirkiniu, galite be jokių rūpesčių pakeisti arba grąžinti*.

Geros kainos garantija

Dirbame tiesiogiai su gamintojais, todėl galime garantuoti geras kainas.

Product added to wishlist
Product added to compare.